Protective gloves SHIELDskin™ Orange Nitrile™ Shield Scientific

Protective gloves against penetration of chemicals and microorganisms

The widely acclaimed SHIELDskin™ gloves provide you with the highest level of “compliance, comfort and protection”. SHIELDskin™ nitrile/neoprene gloves have been specifically designed for laboratory use to protect your assays against contamination and to protect you against biological and chemical hazards.

SHIELDskin™ gloves are classified as Category III PPE against the mortal or irreversible risks as defined in the PPE Regulation (EU) 2016/425. Only Category III PPE gloves are likely to provide the necessary personal protection needed in a laboratory.

SHIELDskin™ nitrile/neoprene and latex gloves have been specifically designed for laboratory use to protect your assays against contamination and to protect you against biological and chemical hazards.

Chemical Protection

A minimum length of 260 mm/10.2″. By offering 10% extra length compared to standard length laboratory gloves (240 mm) and with extra thickness, SHIELDskin™ gloves provide optimal protection against biohazards and chemical splashes. SHIELDskin™ gloves resist to permeation for at least 30 minutes against 3 out of the 18 chemicals listed in
ISO 374-1:2016+A1:2018 (tested according to EN 16523-1:2015+A1:2018).

Biohazard Protection

SHIELDskin™ gloves are tested to demonstrate compliance with ISO 374-5:2016 for protection against biohazard. SHIELDskin™ gloves have an Acceptable Quality Level (AQL) of 0.25, representing a performance Level of 3 according to ISO 374-2:2019. This level of protection in standard laboratory gloves has never previously been available and will provide additional confidence in meeting biosecurity procedures. Microorganism resistant per ISO 374-2:2019 Level 3 (AQL 0.25) and virus resistant per ISO 16604:2004 Procedure B.

Key Strengths

• Brand signature: Orange for biological risk.
• Laboratory gloves for biohazard protection.
• Latex gloves and nitrile/neoprene gloves.
• Non-sterile and sterile gloves.
• Maximum comfort.
• Compliance with the latest European standards.
• Category III PPE gloves (PPE Regulation (EU) 2016/425).
• Class 1 MDR (Regulation (EU) 2017/745)*.
• Extra length from 260 to 300 mm (meets or exceeds ISO 21420:2020+A1:2022).
• Biohazard: ISO 374-5:2016.
  • Biosafety: AQL 0.25 (ISO 374-2:2019 Level 3).
  • Virus resistant (ISO 16604:2004 Procedure B).
• Extensively tested for chemical permeation according to ISO 374-1:2016+A1:2018 (Test method EN 16523-1:2015+A1:2018).
• Reduced risk of allergies.
• Double-walled protection afforded by the twinSHIELD™ technology.
• Packaging designed to comply with laboratory environments processes.

* Except SHIELDskin™ ORANGE NITRILE™ 300 Sterile gloves.