Microsart® e.jet Fluid Pump 4L/min Sartorius

The Microsart® e.jet is a new vacuum laboratory pump able to create sufficient vacuum for vacuum filtration and simultaneous transfer of the filtered liquid to waste. The Microsart® e.jet Transfer Pump is ideal for sample filtration in Microbiology achieving a trans membrane pressure of 600 mbar and a flow rate of > 3.5 Nl/min (3.5 Normliters water displacement by air in one minute). Constant flow rates and a defined maximum vacuum guarantee smooth and reliable filtration.Until now vacuum equipment for the Membrane Filtration Method consists of numerous parts including connectors, tubes, vacuum containers, protection filter, Woulff’s bottle and a vacuum pump. After several samples the vacuum must be broken to empty the filtrate collection container. The complete traditional equipment requires far more laboratory space and is time consuming to operate and maintain. The new Microsart® e.jet Transfer Pump greatly reduces operating complexity.The Microsart® e.jet pump is an ideal accessory for 3-branch and 1-branch manifolds. Compared to traditional equipment Microsart® e. jet and stainless steel manifold require only 30% of the average space meaning in particular less congestion working in Laminar Flow Cabinets.Traditional vacuum pumps often loose their efficiency and capability to generate sufficient vacuum, when liquid is drawn into the pump head. The Microsart® e.jet is designed to pump both gas and liquids, meaning no loss of efficiency or malfunctions from water drawn into the pump head.

The Microsart® e.jet vacuum laboratory pump is designed to create sufficient vacuum for filtration and unlike traditional vacuum pumps, it allows simultaneous transfer of the filtered liquid to waste. The Microsart® e.jet Transfer Pump is ideal for sample filtration in Microbiology achieving a trans membrane pressure below 700 mbar in compliance with ISO 8199 (Water quality - General guidance on the enumeration of micro-organisms by culture). Constant flow rates and a defined maximum vacuum guarantee smooth and reliable filtration. The Microsart® e.jet Transfer Pump greatly reduces operating complexity and is an ideal accessory for 3-branch and 1-branch manifolds. The Microsart® e.jet is designed to pump both gas and liquids, meaning no loss of efficiency or malfunctions from water drawn into the pump head.

The vacuum pump series Microsart® maxi.vac and Microsart® mini.vac provide up to date technology for daily use in the Microbiology laboratory environment. They are electric neoprene membrane pumps and therefore oil- and maintenance-free with a low noise level. The vacuum produced by these pumps is controlled and can be easily adjusted to your specifications. Thus sensitive cells (e.g. bacteria) are concentrated on the surface of a membrane filter under better conditions, which results in decreased mortality of the cells, higher recovery rates and shorter incubation times.

• Ideal for microbiology applications
• No need of suction fl asks and water traps
• Saves 70% working space
• Flow rate > 4,0 l/min
• Line voltage: 100 - 240 V
• Line frequency: 47 - 63 Hz
• Mains: 100-240 V/ 47 - 63 Hz
• Dimensions (WxDxH): 120 x 170 x 190 mm
• Max. ambient temperature: 5 - 40°C